Showing posts with label engineer. Show all posts
Showing posts with label engineer. Show all posts

Tuesday, January 3, 2012

2011 In Review (aka: Did I meet my New Year’s Goals?)

At the beginning of 2011, I posted about my goals for 2011. It seems every year people make goals, but do we ever complete them? Well, in order to figure it out, I'm looking at each of my goals here to see if I met it or some part of it.

I split up my goals into three categories: Engineer, Writer, and Christian. Let's look at them again, shall we?

Engineer Goals:

  1. Graduate in December 2011.

    This one is a technical no but a reality yes. That may not make sense, so let me explain. On December 16, 2011, I finished every bit of work I need to do for my Master's Degree. The following Tuesday I received my grades that let me know I would pass and get said Master's Degree. So done right? Sort of. Because I moved to Albuquerque this year, I had to finish that last semester of school via Distance Learning, and Georgia Tech's Distance Learning office has this really weird rule: a Distance Learning student cannot graduate until the semester after she finishes all her course work. So though I finished everything this past Fall semester, I'm not allowed to graduate until next May. It's very strange. So I'm going to say I completed this goal, though on a technicality I didn't.

  2. Get a job at JPL.

    That's a no. I did not get a job at JPL. However, I did get a job, a job I love, and I started it in June 2011. That's why I moved to Albuquerque, NM. So though this is a no, the heart of goal was still met. I got a job, a great job that I love, a job that enables me to work on satellites. What more could a girl ask for?

  3. Complete my design of R3's ADCS.

    This is a pass. I'm done with my thesis. *does a happy dance*

Writer Goals:

  1. Make the FINAL revision on Spirit Riddled.

    This is a fail. I did not even get through a single revision of Spirit Riddled this year. Working a full time job and trying to finish up a Master's Degree is really time consuming, and so is revising a novel. So this goal is going to have to slip to 2012.

  2. Start querying Spirit Riddled.

    Do I really need to say it? Without that final revision, I couldn't query Spirit Riddled, so this is a fail. But next year. Oh, 2012 is going to be a good year.

  3. Finish a first draft of ANY other book.

    Pass with flying colors! I actually didn't think this would happen at all. But this is the very blog where I posted my sudden inspiration about The Descent of Chris Chappell. Though I had a good start on it, I thought that trying to do the dual school and work thing would make this slip to 2012. But it turns out, writing a first draft is the exact sort of de-stresser I needed while writing my thesis. So to my complete shock, I finished the novel in November. Sure, it's only a first draft. It needs revision. But it's done! I met this goal!

  4. Not be a slacker critiquer.

    I'm going to say this is a fail. I only committed to critiquing for one person this year, a friend of mine who writes SF, but once again, my crazy life got in the way. But now that I have free time (I know, mind boggling) I'm foreseeing that this will be a goal I can meet in 2012. Woohoo!

Christian/Personal Goals:

  1. Be a nicer person.

    I have no idea. It's really hard to judge. But two of my friends asked me to be in their weddings, so that means some people like me? Right? And I moved to a new state where my new coworkers all took to me really well, so I seem to be doing ok. And I got in no major fights over Christmas, though that was due to more of a "keep your head down" policy than niceness. But let's just call this a pass, ok?

  2. Actually have a regular quiet time.

    Fail. I suck at this. I'm going to do better though. This is going to continue into 2012. It's going to happen. I am going to develop good habits!!

In Summary:

I think we can say I met 5 out of my 10 goals. Sure if this was a class, that would be fail, but it's not a class. It's life. I think 50% is pretty good. But we'll aim for better in 2012. We could say that's a New Year's Goal.

So how about you? Did anyone out there meet any of their New Year's Goals?

Thursday, September 22, 2011

I've Gone Insane

I have a terrible track record of not blogging consistently. I mean just look at my archives and its obvious. So clearly I must have gone insane. Or my eyes are bigger than my mouth or ambitions higher than my reach or something like that.

Why?

Because I just started a new blog.

And not a blog that replaces this one. Oh no, a blog to write in addition to this one.

Because as I was thinking about this blog, I've realized its come to be mainly about my life, writing, and my beliefs. Which are great things and things I love discussing. But somewhere along the way, the engineering and science part got lost. And I have a lot to say on those topics, more than a randomly assigned day of the week can make up for. So I've decided to start a new blog solely devoted to science and engineering.

You can check it out here.

So let's see how this adventure goes. And please pop over there and check out Tuesday's post as well as today's post.

This blog, my bittersweet fountain one, will still contain all my anecdotes about being an engineer. All the funny, quirky little stories about my life that are caused because I'm an engineer and live on the socially awkward side of the social spectrum. My new blog, Rocket Science Revealed, is going to focus on the hard science facts and explaining them to you, my reader, in terms a layman can understand.

So come by and check it out. Who knows? Maybe you'll learn something.

And if you have engineering questions, ask them. Because I'm here to answer your questions.

Don't let your science fiction lack facts! Don't let fear of science stand in your way from learning. It's not that hard. And I promise not to drop any differential equations on you. :)

Tuesday, August 16, 2011

Engineering Conferences

I attended my very first engineering conference last week. Though I went to two years of grad school and numerous reviews and workshops, I had never had the chance to go to an honest for goodness engineering conference.

This past week I attended the Small Satellite Conference in Logan, Utah.

And it was awesome.

Imagine 500 engineers, ages high school to 90 years old, all in one place. All talking about something their incredibly passionate about.

Essentially, imagine DragonCon, but instead of people going all fangirl over Brandon Sanderson, they're going fangirl over James Wertz, the editor of Satellite Mission Analysis and Design. Seriously, I haven't seen that much excitement over the new release of a book since Harry Potter Seven. And this book weighs four pounds. Literally, everyone I knew at the conference bought one.

Personally, I went from booth to booth, trying to find vendors of reaction wheels. And when I came across the reaction wheels for CubeSats my mind was blown. CubeSats are satellites that are 10 cm by 10 cm by 10 cm. So basically their reaction wheels are the size of quarters.

Mind blowing.

It's amazing how technology adapts and changes. How people can find solutions for the impossible. And that's the great thing about conferences. You get to discover what everyone else in your field is doing: the work that has been actually accomplished and the work that is cutting edge theory. I sat through four days of lectures and I only fell asleep in a handful of them.

And the falling asleep is inevitable, because engineers love to party.

Granted its not always what you imagine a party to be, since a lot of engineers tend to be socially awkward, but its our version of partying. I saw three movies (Cowboys and Aliens, Rise of the Planet of the Apes, and Captain America). I went bowling four times (won two of those games). And went to two "socials" (officially approved events by the conference). But the "real" party-ers spent all their time at "The White Owl", Logan's only bar. (It's not exactly a big city). I don't drink and think movies and bowling are MUCH more fun, but apparently its like the whole conference shows up there every night.

So that's what engineering conferences are like. Anyone else out there every been to an engineering conference? Any great stories? I have plans to go to several more this year (now that I'm a real person and all), so I imagine I'll have many great stories.

Especially since I don't plan on getting sick for multiple days the next time. (Yeah, it wasn't pretty. I hate being sick on travel.)

Tuesday, August 2, 2011

Wanting to Slap a Minion

If you’ve ever worked with engineers, you’ve probably experienced this. And it doesn’t necessarily happen with only minions (aka people much lower down on the totem pole than you), but you get the feeling most strongly with minions.

A scenario will play out like this:

A professor, who has a doctorate in the field plus 15 years of industry experience plus a book written with his name on it, will be explaining something to the class. It will be something extremely well studied that was discovered a long time ago, probably by Bernoulli, and a student will challenge him. The student will argue with him for ten minutes about something not pertinent to passing the class which is basically saying, “I know you have all these degrees and experience and I’m a 19-year-old boy, but I’ve thought of something NO ONE else has, and basically, I’m smarter than you.”

Unfortunately for that student, most professors aren’t afraid to embarrass you in front of the entire class. Depending on the professor there can be several responses: 1) handing the marker to the student and asking him to teach the class if he’s so smart, 2) just verbally smacking him down by listing your accomplishments versus his (I’ve got five degrees and a Nobel Prize. And you’ve…graduated from high school), 3) telling the student to get out of the class and not come back until he’s ready to learn, and really the possibilities here are endless. Professors are creative people.

But this doesn’t just happen to professors. At my new shiny, real job, I have an intern who makes me want to slap him daily. A scenario will play out like this:

Melody: The type A bolts go here. (pointing to a series of holes)

Intern: You’re wrong.

Said intern couldn’t even see where Melody was pointing. He just assumed that she, a woman with a college degree (which he doesn’t have) and two years of working experience (which he also doesn’t have) is wrong. He then proceeded to give us the “right” answer by pointing exactly where Melody just pointed.

About this time I have an overwhelming desire to slap him upside the head.

He does this a lot and he’s not alone. Many engineers have this “I’m always right and you’re always wrong” mindset. Which absolutely makes no sense to me.

I always assume my superiors at work and school are correct and if there is something where I really feel they’re wrong, I just don’t state “You’re wrong.” I’ll usually say, “Should we double check that?” or “I seem to remember being taught such-and-such (which is the opposite of what you are saying) in class. Is that wrong?”—thereby forcing the person to think about what they said and explain themselves.

Basically there are nicer ways to say things without making your superior want to slap you or just stare at you and say, “I have three degrees. Who do you think you are, Mr. I’m-about-to-be-a-third-year-in-college?”

Currently, we’ve ignored this interns “you’re wrong, I’m right” tendencies. He’s leaving in two weeks. It’s not a big deal. But I’m not sure what the appropriate way to deal with this behavior is. (Slapping is, unfortunately, not an option). Has anyone out there dealt with this attitude? Anyone out there ever wanted to slap a minion? What have you done instead? How have you dealt with it?

Tuesday, June 28, 2011

"No Inorganic Metals"

A few weeks ago I went on a business trip to Boulder, CO. (*Pause.* That's right. I just said I went on a business trip. I'm like a real person now! Woohoo! *Resume.*) While we were there, we were provided with locally bottled water. Now, in many ways this water was like any other bottled water: funny tasting and expensive. However, the label for this water made me do a double take. This bottle of water listed the reasons why this water was awesome:
  • 100% Natural Glacier Fed Alpine Springwater
  • Naturally Highly Oxygenated
  • Neutral pH
  • Helps your body flush toxins
  • High in natural vitality
  • Aids absorption of nutrients within cells
  • No Inorganic Metals
Now, there are many things wrong with this label, but the one that immediately struck me was the last one. "No Inorganic Metals."

Wait? What?

No Inorganic Metals? What does that mean? What does that even begin to mean?

Some of you reading this may be confused. You're not engineers or chemists, and high school chemistry was a long time ago (or hasn't happened yet), so I understand that you might be baffled by why this statement baffles me. So let me provide the definition of inorganic as provided by dictionary.com:

1. not having the structure or organization characteristic of living bodies.
2. not characterized by vital processes
3. Chemistry. noting or pertaining to compound that are not hydrocarbons or their derivatives.

Let's treat those three definitions like a checklist. Are metals inorganic? Well do they have the structure or organization characteristic of living bodies? Umm, no, last I checked metals didn't. Because they're not alive. Are metals characterized by vital processes? Once again, no. They're not alive. Do metals involve hydrocarbons or their derivatives? Well, then they wouldn't be metals. So yes, metals are indeed inorganic.

Then what does it mean? Contains no inorganic metals? There is NO SUCH THING as an organic metal. Metals are by definition inorganic. Does that mean the bottle is simply saying it contains no metals? Because it can't mean anything else. Why not then just say it contains no metals? Why add all this confusion?

The answer to that is most people have no idea what the words inorganic and organic mean. That's why someone can say they just bought "organic milk." Listen to me, friends. There is no possible way to make milk inorganic. Even if you make it in a lab and a cow is not involved at all, it's still organic. It still contains hydrocarbons. Organic does not mean natural. Inorganic does not mean unnatural. Metals are very natural. And they're very inorganic.

But then again this water was also "high in natural vitality." Consider that vitality means:

1. exuberant physical strength or mental vigor
2. capacity for survival or for the continuation of a meaningful or purposeful existence
3. power to live or grow

I'm very concerned by this water. I don't ever want to drink water that is high in natural vitality. I'm pretty sure that means my water is alive.

So combining those two points alone, possibly means the water contains living metals.

Run away, humanity. Destroy this water whenever you can. I'm pretty sure its alien life that is going to take over the world. Living metals have to be extraterrestrial. They don't exist on earth. So basically, run*.

*Yes, that's a Doctor Who quote. I'm a nerd. I can't help myself. But if there are living metals in that water, then we need the Doctor to come help us. Humanity is in peril.

Tuesday, May 10, 2011

There is no sound in space

Sometimes people complain that science fiction is hard to write or create because engineers and scientists are too critical.

This is of course balderdash.

If I wrote a book or made a movie that was set in 1605, and a character appeared wearing a watch, people would think I was an idiot. They would probably mock me and criticize me for not doing my research into the time period. And yet, when some people (clearly not all) write science fiction books and movies, they think they have a free pass to ignore some of the most basic obvious facts--facts that anyone who has a slight interest in that area of science would be able to tell you.

Like the fact that there is absolutely no sound in space. So all those loud explosions you here? Not possible. Any first year physics student, heck anyone who has taken physics 1, should be able to tell a writer this. Sound waves can only travel through a medium because they are longitudinal waves of varying pressure. Since space is practically* a vacuum, there is no pressure to vary. Thus, no sound.

I feel like this should be common knowledge, and yet it's not. Or at least, writers continually ignore it--among other obvious engineering/scientific principles. Watching science fiction movies is sometimes painful. And often hilarious.

For example, in Tron Legacy "genetic algorithms" are mentioned. And yet they're mentioned in such a ridiculous way that when I went to see it in theaters, I burst into laughter in the middle of the movie. The people in the movie theater thought I was insane. Possibly I am insane, and yet when I watched the movie with my engineering friends, they burst into laughter at the exact same point.

I was reminded of how ridiculous science fiction could be when I was watching Armageddon. On many levels, Armageddon is a good movie, but from an engineering (especially an aerospace engineering) aspect, there are just so many things wrong with that movie. Things that could have been fixed if they had simply asked an engineer.

So my thought on these Engineering Tuesdays is that I could go over common movie errors or even dissect particular movies, so that future movies/books don't make the same error. What do you guys think? Any movies you would like to see discussed? Any movie scenes that you're unsure of the veracity? Let me know and I'll be sure to look into them. :)

*There are, of course, particles in space and space's pressure is not exactly zero. However, it is incredibly close, so for most purposes its treated as thus.

Tuesday, February 22, 2011

Achieving Life Goals

There are many types of life goals. In my very first post of this blog, I listed my big three overarching life goals. However, there are some smaller life goals that aren't nearly as important or are merely building blocks to these big goals. For example, one of my life goals is to be invited to be a guest at Comic-Con. I see this as a stepping stone to my Hugo Award dream. Another smaller life goal of mine was to meet LeVar Burton, which I did at Dragon*Con this year. And yesterday, I unexpectedly met another life goal.

I came to school this morning an hour later than usual, because my 9:00 o clock meeting was canceled. I was strolling up to the AE building, when suddenly a student with a yellow bandanna tied around his upper arm dashed past me into the building, running as if his life depended on it. In a way, his life did. Today was the first day of Zombies versus Humans. Georgia Tech plays Zombies versus Humans every semester, and my friend Allison was looking forward to playing it this semester. However, it looked like she had missed the start, so instead of going straight to my office as normal when I entered the building, I went to Allison's office.

First off, I informed Allison she had missed the start of the game. She had already realized earlier that morning it was true. My grisly deed done, I went to head out of the office, when the undergrad at the undergrad desk stopped me by saying, "Did you hear Billy Nye is coming today at 12:30 today?"

Me: "Like to Georgia Tech?"

Undergrad: "Yeah, but to our conference room."

Me: "No way. No way is Billy Nye coming to our conference room."

But it was true! Bill Nye had lunch with my lab today, which isn't that many people. He came and we geeked out over several aerospace engineering concepts like adding ridges to motorcycle helmets to create turbulent flows and watching movies of old airliners doing barrel rolls. It was awesome.

And so another childhood dream and life goal fulfilled. I met Bill Nye! Woohoo!

Tuesday, January 11, 2011

A Treacherous Walk

I drive my car the entire 1.6 miles to work every day for a very good reason. Living in the border between midtown and downtown Atlanta isn't exactly safe. However, recently, the an apocalypse of snow and ice has hit Atlanta. Georgia Tech has been closed for two days. TWO DAYS.

In all my 5.5 years at Georgia Tech it has never closed. Not for tornado warnings, snow, ice, or anything. But we have gotten 4 to 5 inches of snow covered in a nice thick layer of ice. Georgia Tech is closed.

However, if you read last Thursday's post, you know that my research team is crazily trying to finish building a satellite which means shortly after I learned Georgia Tech was closed on Monday I got an email from my project manager that said, "You WILL be coming in to work tomorrow."

Of course. Let me just drive my little car up the icy, hilly streets and...yeah that's not going to happen.

So instead I pulled out my boots, my scarf, my hat, my long john's, my turtleneck, my sweater, and my jackets and bundled up like that kid in a Christmas story. I then walked the entire 1.6 miles in the snow with no problems.

That was yesterday. Today was a little different because you see while yesterday I walked to work in snow, today I walked to work in ice.

There were literally parts of my walk where I was sliding down the sidewalk, praying that I wouldn't fall and break something, and using a nearby building to balance.

I watched a car spin out and nearly take out a few other pedestrians.

I was then walking by a church when I heard a strange sound. I looked around in alarm, fearing that a car was careening towards me when suddenly I was being pelted by icy, hard snow. Snow was falling off the roof of the church and on to me.

Once I finally got to the AE building, I couldn't actually get to the first door I tried to access, because the door is on a slight incline that was covered in ice.

Man, I hate the snow.

But it did give me a lot of perspective and great ideas for a new story I'm writing. (I know, I know, I'm always writing a new story. Doesn't help my New Years Goals). Snow isn't something I have a lot of experience in. Atlanta, GA is the furthest north I've ever lived. My life was spent everywhere from Hawaii to Florida, but no where that has snow regularly. And my new world I've created is a cold one. It can't help it. That's just the way the orbital mechanics of the world is.

I now know what it feels like to have snow crunch under my feet (walking in thick snow is kind of like walking in sand, which I have a lot of experience with). I now know the dangers of snow falling off roofs. I now know how terrifying having no control on your footing because of ice can be.

Yes, lots of good ideas came from my rather treacherous walk this morning. Hopefully I'll get even more ideas on my way back...and less bruises.

Thursday, January 6, 2011

Roadtrip

School did not start this week, yet I've spend everyday chained to my desk working diligently. Though I have no homework, I have something even more important: a research deadline.

My research involves designing (and fabricating when necessary) the attitude determination and control system for a student made satellite. This satellite is being built as part of the University Nanosat Program, which is basically a student satellite competition. That competition final (called Flight Competition Review or FCR) is on January 17th.

In case you've never been around a bunch of engineering grad students preparing for a major deadline, I can sum it up for you in two words: chaos and panic. We might seem calm. We might just be sitting on our desks working on one of the three posters we have to have, but our minds our reeling as we try to fathom everything we have to get done in the week we have left.

It's true that January 17th is more than a week away, but as of today we only have a week left. Because we have to drive to Albuquerque, where the FCR is. Why aren't we flying? Well....let's just say that none of us trust a satellite to be put under an airplane. That and the torque rods aren't allowed to fly until actual time for space flight, because time in the air can mess with the annealing we had done.

Albuquerque is really really far away from Georgia Tech. According to Google maps, the trip is going to take us about 23 hours, or 11.5 hours a day. That's not including meals, getting gas, and other rest stops.

So while we're preparing for the chaos and insanity that is FCR, we also have to prepare a roadtrip. Next Thursday is solely dedicated to packing the satellite.

For me preparation also requires one other thing. Books. Lots and lots of books.

I've done a lot of roadtrips with my family (roadtrips, moving, tomato, tomahto), and the best way for me to get through them is to read. However, I also read really really fast. So it's necessary that I get a couple of books. What's on my list for the total 46 hours (if you count both ways) I'm going to be in the car?

  1. XVI by Julia Karr: If you like YA dystopian books, you should be following the League of Extraordinary Writers. If you like to write books, you should be following the League. In general, you should probably be reading the League. Julia Karr is the first of the League to get published this year. I've been dying to read this book since I first heard about it, and the temptation to read this book before my road trip has been overwhelming. I will not give in! But it will be the first book I read on my trip.
  2. The Scorch Trials by James Dashner: This is the sequel to Maze Runner, which left me completely hanging. Will Thomas and the Gladers survive yet another test? What has happened to the world? And are those crazed people zombies? So many questions. I hope this book will answer them all.
  3. I Am Number Four by Pittacus Lore: This book has a movie coming out, and as a rule I like to read the book before the movie. I'm not even entirely sure what it's about. All I know is three people are dead, and the narrator of this book is going to be next. Seems interesting.
  4. Beastly by Alex Flinn: Yet another book with a movie coming out soon, and a movie that has one of my favorite actors in it: Neil Patrick Harris. He doesn't play the main character, but he's in it. It's a retelling of Beauty and the Beast, in the modern world. I love Beauty and the Beast, so I'm sure I'll love this book.
  5. Alcatraz and the Shattered Lens by Brandon Sanderson: The long awaited book four of the Alcatraz series! I need to know what happens! NEED TO KNOW! This might require me rereading all the other books on the trip as well. But I'm cool with that. I have plenty of time. Though the Alcatraz books have a tendency to make me literally laugh out loud. I hope the other people in the car don't think I'm crazy.
  6. The Soldier Son Trilogy by Robin Hobb: I've never read a Robin Hobb book, but she's published a lot of books and the back of the first book of this trilogy sounds really interesting. And it's epic fantasy written in first person. When does that ever happen? I also felt the need to round out my reading list with my usual genre. Epic fantasy. Yum.
So here's how I imagine this going down. I'll read books 1 - 3 on the first day. They're all YA, and I can read a YA book in about three hours or less. So that's about 9 hours of reading. Eventually it'll get dark and I won't be able to read anymore unless I find a light, so for those hours I'll just have to suffer. I imagine that the second day I'll read book 4 and reread the entire Alcatraz series. There may be four books, but they're MG, so even smaller than YA. Then on the ride back I'll read the three books in 6. I may not make it through all three. They're kind of long (we're talking on the order of 600 pages). It depends on how good they are. I read the Mistborn trilogy in 2 days, so its possible.

Then when I get back on January 21st, I will write reviews of all these books plus some others I've read and forgot to review. So be prepared. There is going to be a mass of book reviews posted on this website very soon.

Oh, and don't worry. I'm going to be in Albuquerque for a while, but I'm going to write all my posts for that time in advance and schedule them to post on the regular Tuesday/Thursday schedule.

Albuquerque here I come.

Tuesday, January 4, 2011

New Year's Goals

It's the beginning of a new year, and with that new year comes new hopes and dreams. At the beginning of each new year I see this vast blank page, waiting for me to fill it, waiting to to fulfill all my hopes and dreams.

I don't usually make New Year's Resolutions, but I always envision the incredible things I might do in the New Year. So this year, I am making New Year's Goals.

Since my life is divided in three main ways (Christian, writer, and engineer), I'm making those goals in those three categories.

And this year my friends is going to be a BIG year. Why you ask? Well, you'll have to read my goals to find out.

Engineer Goals:
1) Graduate in December 2011.
Wow. Graduation. Again. But this time, for realz. This time, I'll walk that graduation stage in a hooded robe to get my Master's Degree and there will be no going back. No going back to school that is. With that degree I'm going to be done, and I CAN'T WAIT!

2) Get a job at JPL.
That's a big one. A life goal actually. But since this is the year I graduate, this is the year to realize this goal. Fingers crossed my friends! Hopefully this time next year, I'll be looking for an apartment in Pasadena, CA.

3) Complete my design of R3's ADCS.
This one is sort of necessary to make either 1 or 2 happen. I can't graduate without completing it, because this is sort of my master's thesis. I can't get a job unless I graduate. And designing a complete ADCS system from scratch is a great way to get the attention of JPL.

Writer Goals:
1) Make the FINAL revision* on Spirit Riddled.
I don't know if my final revision will be the next revision or two more after that, but I want to get this story done this year. I've been working on Spirit Riddled for ages (school really slows down the writing process), and I'm ready to be done.

2) Start querying Spirit Riddled.
Yes, with final revision done I can finally query! For the non-writers who read this blog, that means I will start sending out a letter describing my book to agents in hopes that they will represent me. Woo! Perhaps this goal would be better if I said "I will get an agent for Spirit Riddled", but I've never seriously queried a book before** so querying is a big step for me.

3) Finish a first draft of ANY other book.
I believe I've expressed before that I have writer ADD. I have a hard time focusing on one story. School also sort of sucks all the time out of my life. Most of my stories make it to about 10 chapters in until something else takes over my life. Namely school. So I would like to have another first draft done, so once Spirit Riddled is done done I can start another set of revisions.

4) Not be a slacker critiquer.
If I've ever agreed to critique something for you in the past year, I apologize. I'm going to once again through school under the bus, but its the only real excuse I have. This year, I'm actually going to respond to the people I'm critiquing for in a timely fashion. Woohoo!

Christian/Personal Goals:
1) Be a nicer person.
So 1/3 of my family thinks I'm like a really mean person. (1/3 being two people, so more than you might initially think). I'm going to work on that one. I don't mean to be mean (is that a pun? it's not intended). I don't think my friends think I'm mean, so maybe its just that I'm too harsh on my family. Maybe I expect too much of them? So this may actually come down to me not caring as much. (That's my little sister's advice). We'll see how this goes.

2) Actually have a regular quiet time.
Once again, I blame school for this not occurring. But by golly, I'm not going to continue allowing school to take over my life. I'm going to schedule regular quite times and its going to happen!

So that's my New Year's Goals. Any else out there have goals? Any thoughts on mine?

Happy New Year!

*By final revision, I mean my final authorial revision outside of the revisions my agents and editors will probably ask me to do. Most agents and editors do have suggestions and want changes. I'm cool with that.
**This is not to say that Spirit Riddled is the first book I've ever tried to write. I've always been a really harsh judge of my own writing and I've shelved numerous stories for various reasons. This will be the first time a story has made it this far in my personal judgment court.

Friday, September 17, 2010

A Day in the Life of Me

During the school year I blog less than I do in the summers. Yesterday, I could not find the time to blog at all, even though I swore I would maintain a Tuesday/Thursday blogging schedule. Why is this? Why is my life so awful during the school year?

Well let's look at my schedule in the summer, while working:

6:00 am Wake up
6:45 am Drive to Work (listen to a podcast, usually a sermon or book on tape)
7:15 am Arrive at Work. Start, well, working. Usually I have three projects or so that I use to keep myself busy while I work
4:45 pm Leave Work. This is a nine hour day with 30 minute lunch break. I work nine hours, because I still have a student mentality even in the summer and really can't fathom going home after only eight hours of work
5:15 pm Get home. Eat something. Work on my WIPs. Blog
8:00 pm Read a book for pleasure
9:00 pm Go to bed.

Yes, it's an exciting life, but it's really not that busy. I do work. I write. I read. I sleep. Wooo.

Ok, so to give you an example of my life during the school year, here is this past Wednesday's schedule:

7:00 am Wake up
8:00 am Leave for school.
8:20 am Arrive at my desk. Check my email.
8:30 am - 10:00 am Do research
10 am - 12:30 pm class (Rocket Propulsion and Planetary Sciences)
12:30 pm Lunch
12:40 pm Homework
3:00 pm Senior Design Lab (I'm the TA)
6:00 pm Run to my car, drive home, take my dog out, feed him, eat something
7:00 pm Back to School. Grade papers
10:30 pm Leave school.
11:00 pm Pass out

Notice in this schedule there is no time for writing or reading. I read for pleasure while eating breakfast, lunch, and dinner. So that's about 45 minutes total of the course of the day. I write a little in lectures, but we're talking 500 words a day.

And the sad part is, I don't even get a break on the weekends. Tomorrow I will be coming to my desk at noon and work on orbital mechanics until I feel a need to break for food around seven pm.

I know we're all busy. Some of you go to work all day and have kids, which means you like never have a moment to yourself. And it's easy for me too look at my schedule and think "I can't write!" And I can feel sorry for myself or whatever.

But I don't. I chose to go to grad school. I chose this life. And I do occasionally find times to write. And I still get holidays. I'm already planning my fall break trip (going to Boston to see my sister--woo!).

So I know all you guys understand my busyness, and forgive me for not blogging yesterday. I know we're all busy. So how do you guys find time to write if you're writers? Do you write during lecture like me? Or do you wait until the kids are in bed and you have twenty minutes to yourself?

Thursday, September 9, 2010

Dragon*Con Revisited

Everyone does cons in their own way. For me, I like to go in with a plan. I created an excel sheet that planned out my days including primary events and secondary events, in case primary events were canceled or changed. As I said, not everyone does this. Some of them just show up to Dragon*Con and do whatever they want. Some of them just roam around the dealer's rooms. Any method, it's always fun.

In addition to my over-excelled weekend, I also had four goals:

1) Shake LeVar Burton's hand and get his autograph.
2) Get Michael Shanks' autograph for my younger sister.
3) Get Brandon Sanderson to sign both my ARC and hardback versions of The Way of the Kings.
4) Buy a T-shirt.

That last one seems a little less extravagant compared to the first three, but every year I add at least one nerdy t-shirt to my collection.

This year I met all my goals. It was fantastic, even if there were a few panels that were canceled that I really wanted to go to. Ah well. That's what the secondary panel list was for.

I also bought an official Wheel of Time Great Serpent Ring. That's right I'm a nerd, but I'm convinced it's the best frivolous purchase I've made in a long time. It's made of sterling silver so it's shiny, always a plus. It's a ring, so I can wear it every day, not just once every two weeks like a T-shirt. And the biggest appeal of all, it's an Aes Sedai Great Serpent Ring. So every time I look at it, I think of Wheel of Time, and I get a little happy on the inside.

Seriously, it's amazing how happy looking at this ring can make me when I'm banging my head, trying to figure out how to code the N-body orbital mechanics in Matlab. But in the middle of my look, I'll look down at the ring and think "Ah, Wheel of Time, good times." And my brain comes back from the edge of stress and I can get back to my homework.

So enjoy the little things in life, like Great Serpent rings, that make you happy.

And now I need to go buy some frames for the signed LeVar Burton and signed Michael Shanks pictures.

Tuesday, September 7, 2010

Post Dragon*Con Recovery

If you've never been to a SF/F convention before, you really can't comprehend what you're missing. Imagine the most crowded environment you've ever been in. Then add at least 20,000 more people. Then imagine that half of those people are in costumes. This image only scrapes the surface of Dragon*Con.

Dragon*Con is an environment that can make fifty-year-old men act like sixteen-year-old girls. Seriously. My dad almost passed out when Richard Hatch (from BSG) walked by him.

So Dragon*Con is four days of awesomeness. I attended classes for writers, Star Trek Panels, Stargate Panels, author talks, and all sorts of awesome things. So the question is, after a weekend of pure amazing-ness, how do you recover? How do you go back to just mundane and quotidian?

Well first off, you have to understand that there are two stages of Post-Con feeling. The first stage is exhaustion.

Sure you had a great weekend. You shook LeVar Burton's hand. You heard Brandon Sanderson read from the next (unpublished) Wheel of Time book. You saw costumes that made you think someone stepped out of the Lord of the Rings. But it's been four days--and the con runs for the full twenty-four hours of each day. You've basically only slept four hours total. You are tired and a small little part of you is actually relieved the con is over. You can sleep. And your bed is soooo inviting.

So the first stage of your recovery is passing out in your bed as soon as the last panel closes (or you fly back to your home, depending on the closeness of your home).

The second stage is regret. You've waken up, you feel mostly refreshed (it takes close to a week to recover from such exhaustion), and you reflect on the awesomeness of Dragon*Con. Then you remember that the next Dragon*Con is a full year away. You now have 365 days until you can experience anything that amazing again. Sorrow and sadness wash over you, as you realize that you have to go back to work or school. You can't just spend the rest of your life talking about science fiction and snapping pictures of fantastic costumes.

So how do you recover from this? How do you move past through this regret?

One answer: start planning for the next con.

Who needs to live life from day to day? Live life from con to con. Start planning next years costume.

Though maybe you should do schoolwork...hmm...my orbital mechanics homework is a little incomplete.

Ok, ok. The best way to get past a con is throwing yourself into your work and your actual life. But that doesn't mean we can't dream about the next con.

Only 364 days!!! Wooo!!!

Thursday, September 2, 2010

Engineering Spotlight: Kyleen J., CEE

Name: Kyleen J.
Major: Civil Engineering
Title: E.I.T., Bachelor of Civil Engineering
Company: Nannies R Us (not really, but I am currently a nanny...)

Why did you want to become an engineer, and more specifically, your particular type of engineer?
Unlike my dear friend Alisha, I did not enjoy playing with Legos. I did, however, enjoy math workbooks. In fact, I used to complete my brother's workbooks at the end of each school year for fun, even though he is three years older than me. When senior year rolled around, I knew I wanted to attend Georgia Tech. After looking at the majors, I chose architecture on my application. Then, I went to a meeting for incoming architecture students and realized I was the only person in the room who hadn't played with Legos. I asked the advisor how I could do architecture with more math and less art, and civil engineering is what I ended up with. Since then, I have fallen deeply in love with many aspects of civil engineering, including land development, city planning, environmental management, and construction.

What do you do? (At your job or in your research?)
I take care of a 7-month-old baby. Seriously. But what I'm looking to do for my career is anything that's at the intersection of civil engineering and public policy. I live in Los Angeles, so there aren't a lot of jobs available for a recent graduate in my field, but I've heard encouraging things about the energy field, so I'm shifting my job search focus to that area.

At my co-op, I did land development, which gave me the opportunity to work alongside public policymakers, hydraulic engineers, transportation engineers, architects, surveyors, drafters, sanitary engineers, city planners, and construction workers. And here in L.A., we were often working alongside the ocean or celebrity properties, which always made the day a little more interesting. I got to spend time in the office, working with my wonderful co-workers on designs for residential and commercial properties, but I also got to spend time on construction sites, learning about the different stages of construction and the unique challenges for each type of job. Some days, I got to do some light surveying tasks in the field, which included counting parking spaces, measuring distances and curb heights, and taking pictures of wheelchair ramps at every intersection in a particular city. I also got to attend a public hearing on the changes that were being made to the Stormwater Pollution Protection Plans for Ventura County. Sometimes, I'd set alignments in master files for projects or mark up a set of plans to check quantities in cost estimates. A couple of times, I got to go downtown to do research for projects. These were my favorite days because it was usually just as quick to take the freeway downtown as it was to take the Pacific Coast Highway, so I got paid to drive the PCH and see dolphins jumping in the Pacific Ocean!

I loved every single day of my job. There were rough times when an engineer wouldn't trust me with a task or when layoffs came through our office or when I just couldn't meet a deadline, but I was reminded every day that God has given me the ability to perform the tasks necessary for a career that speaks so strongly to many aspects of my personality and my calling.

What do you do outside of engineering?
I spend a lot of time at coffee shops, meeting plenty of people from all different walks of life. God has blessed me with unique ministry opportunities at coffee shops all over L.A. I also enjoy being with my roommates and other believers here, sharing our triumphs and struggles with each other as we seek to live out the Bible through God's transforming grace. I always have a beach towel in my car because I love driving down to Malibu to see the sunset or just soak in some fresh air and sunshine. I really treasure this time in my life, when I can spend hours alone with the Lord and then drive somewhere to meet up with a friend who needs encouragement and then come home to my sisters, who are always up for a good conversation.

Anything else you would like us to know about you or your work?
Civil engineering takes a great deal of technical knowledge, communication skills, determination, and openness to change. Even though it's the oldest type of engineering, technology is changing the field daily as more projects are being handled using video conferencing and 3-D CAD. I can't wait to watch civil engineering evolve into a more sustainable, more ethical, and wiser industry.

Tuesday, August 31, 2010

Genetics

Note: I apologize for all the weird extremely large breaks in the text. I don't know what's wrong with my html, and I apologize. I'm thinking it's some weird interaction of blogger's interface with my actual html code. If anyone out there knows what's going on, please let me know.

First off, I am not a geneticist. DNA, genes, and all that jazz are not my specialty at all. I, in fact, harbor a deep dislike of biology. This is why I went into aerospace engineering. However, that being said, I did take biology in high school and know the basics of dominant and recessive genes.

It seems to me that many modern authors have forgotten their ninth grade biology.

I have gotten this impression from several books I have read recently, books where I have been jarred by a child simply having the wrong hair color, eye color, or skin tone. (I say skin tone instead of skin color because it is much much much more complex than "black", "white", "brown" color words that people use. And not just politically correct complex. I mean like genetically complex).

So let me remind you of Punnett Squares.

Punnett Squares are this simplifying tool people use to predict what trait a child will have if their parents have certain traits. For example, the simplified eye color Punnet Square. In this square capital B means brown and lowercase b means blue. Got it? Ok. So let's say the mom has brown eyes with a recessive blue gene (meaning one of their parents or grandparents had blue eyes). The mom then has the gene 'Bb'. But the dad has brown eyes with no recessive gene trait. What is the probability that the child will have blue eyes? Let's look at our Punnett Square.

















Bb
BBBBb
BBBBb
In order to have blue eyes, the child has to have a completely recessive set of genes, or bb. As you can see in the table, it's not possible. These parents cannot have a blue eyed child. Now that is not always the case for brown-eyed parents, as I'm sure you know. Let's check out another square where both parents are Bb.

















Bb
BBBBb
bBbbb
As you can see from this, most likely the child will have brown eyes, but there is a one in four chance that the child will have blue eyes. So it is possible to have parents with brown eyes and a child with blue, just unlikely. Even if one parent is blue-eyed and the other parent has the recessive blue-eyed gene, it's still very likely to have brown-eyed children.

















bb
BBbBb
bbbbb
See, that's a fifty/fifty split.

Eyes are actually more complicated than the 2x2 square indicates. I found this blog post that describes the more complicated square that takes into account that people can have green and hazel eyes. The writer does show it's possible (but extremely rare) for parents with blue eyes to have a brown eyed child. But the matrix just as easily shows that blue eyes are the most recessive of eye types, and therefore, theoretically, the rarest.

So why did I go to the trouble of explaining all of that? Because if both of your character's parents have blonde hair it is highly highly highly highly unlikely (if not impossible) for the child to have black hair. If both of your character's parents have brown eyes, it's most likely that your child should have brown eyes. Don't just make these things up. Don't just think "Hey wouldn't it be cool if the mom was blonde hair/blue eyed, the dad was red hair/brown eyed, and the kid was black hair/green eyed."

It's not cool. It's wrong. And your readers will know. Especially if you write YA, because guess what--teenagers have to take biology.

So do your research and think about the genetics. You don't have to get complicated, just write out the basic Punnett Square. Give easily overlooked stuff like genetics an actual thought and your readers will appreciate it.

Thursday, August 26, 2010

Engineering Spotlight: Jennifer S., IE

Name: Jennifer S.
Major: Industrial Engineering
Title: Quality Assurance Engineer
Company: Lockheed Martin

What is Industrial Engineering?
Historically, Industrial Engineers were employed in the manufacturing field to increase throughput, decrease costs, and ensure quality. Today, manufacturing is still a major IE focus but IE methodology is now applied in healthcare, finance, the energy sector, transportation networks and many other areas. Industrial Engineers are continually looking to improve the way things are done, maximizing efficiency and effectiveness. They use math-based techniques to optimize a complex system of people, technology, and resources.

Why did you want to become an engineer, and more specifically, your particular type of engineer?
I actually never wanted to become an engineer. I am in the engineering field today because of convenience and aptitude. Convenience due to the fact Georgia Tech, a premiere engineering school, is less than an hour away from my parent’s house; aptitude because I am intelligent and excelled in math and science during high school. I am thankful I happened to choose Industrial Engineering because it is a great fit for me. I like the math-based approach to solving problems and the basic idea that Industrial Engineers find efficiencies to make things better.

What do you do?
In my current job at Lockheed Martin I help ensure certain quality standards are being followed and implemented. As an aerospace manufacturing company, Lockheed Martin adheres to standards such as AS9100 (aerospace specific) and ISO9001 (quality management). These are usually contractual requirements but I also ensure other regulatory or legal requirements are being followed.

During college I worked in the Industrial Engineering department at Walt Disney World. This job was a more typical IE position and I used techniques like simulation, calculating throughput, and statistics. I worked on projects that included optimally deploying buses throughout the property to ensure guests are where they want to be when they want to be, making lines move faster, efficiently washing and handling the 100,000 pounds of laundry A DAY Disney guests use, and improving processes in the warehouse that maintains stock of Disney products used in the parks.

What do you do outside of engineering?
My current endeavor is decorating my new apartment. I am on the hunt for the perfect couch and am looking for simple, cost-effective ways to decorate. I love to read (recently getting into the SF genre). One of my favorite things to do is relax on a boat and have fun water skiing, jet skiing, or wakeboarding. I also like to run.

Anything else you would like us to know about you or your work?
My favorite foods are sushi and cereal.

Where can I find more information?
Georgia Institute of Technology, the number one school in the nation for Industrial Engineering, is a great reference for learning more about IE and its application.

Watch this video to learn more about IEs at Disney.

The professional IE organization, Institute of Industrial Engineers.

Thursday, August 19, 2010

Engineering Spotlight: Logan W., AE

Name: Logan W.
Major: Aerospace Engineering
Title: Graduate Research Assistant
Company: Georgia Institute of Technology

Why did you want to become an engineer, and more specifically, your particular type of engineer?

Truth be told, it was a bit of a convoluted path. I grew up under the shadow of Cape Canaveral where my father worked for a time, and my grandfather was involved with the Apollo program. Needless to say I was watching shuttle launches from the front yard before I could understand what I was looking at. While I was interested in the space program, I never really considered actually doing anything related to it; instead I always figured I’d go to med school though I don’t remember why. That changed in high school physics when I realized that the immutable laws of the universe, albeit sometimes unknown, were much more interesting than a study of medicine. Adding to that, I found I would rather do something with this knowledge – application of knowledge, rather than the pure study of knowledge. Thus I decided to be an engineer.

There were two fields of study in physics that I found the most enjoyable and fascinating that I wanted to work in: atomic/nuclear physics and astronomy. For an engineer, the applications opened to me were fission/fusion research for the former and the space program for the latter. It was only in my last year of undergrad (which was in mechanical engineering, as it was the most general major) that I read about the Deep Space missions and the use of ion engines as the primary propulsion unit. One of my professors informed me that Georgia Tech recently picked up a new professor starting a lab researching these types of engines. As this type of technology, called electric propulsion, combined features of both atomic physics and the space program it was too good of an opportunity to pass up. That is how I ended up in aerospace engineering working on electric propulsion.

What do you do? (At your job or in your research)

The kind of research our lab focuses on is prototyping new technologies and testing new concepts, be it new engine concepts or modifications to existing engines. Currently I am involved in two avenues in research: ion engines and helicon plasma sources. Ion engines operate by ionizing a gas to form a plasma. The ions are accelerated out of the engine on an electric field generated between two grids. These engines are characterized by very low propellant consumption rates with very high exit velocity, making the engine very efficient when used over long periods of time. As a rough analogy, think of a car with very low acceleration but very high gas mileage and very high top speed. My involvement is focused in trying to improve the efficiency of the plasma generation within the thruster.

Helicon plasma sources are devices that generate a plasma using radio-frequency waves. Most thrusters in use today ionize their propellant using electron collisions, which can be inefficient as electrons tend to collide with the engine walls, other ions, etc before colliding the desired neutral atom. This wastes energy that could have gone to thrust generation. Helicon sources have been found since the early 1980s to be more efficient for generating a plasma, but the problem is that why it is so efficient is not well understood. I work to better understand how these devices operate and how to predict their behavior and performance given a set of operating conditions.

What do you do outside of engineering?

I am a voracious reader; I’ll read almost anything, from the classics to military history. I also enjoy music, both listening to it and making it when given the opportunity. I must also confess to being a fan of computer games, particularly of the strategy genre.

Anything else you would like us to know about you or your work?

Truth be told, electric propulsion is one of those research areas that doesn’t have a field per se. I am in the aerospace engineering department, but my work is mostly electrical engineering with a mix of mechanical engineering, chemistry, physics, and a little bit of aerospace. So the next time you hear someone talk about “multi-disciplinary fields” don’t snicker too much, you just might find yourself in one.

Tuesday, August 17, 2010

Means Little to an Engineer

I was reading a thesis today. Yes, that's how I spend my Tuesday's. Reading theses. Anyway, I was reading it and had to stop when I read the sentence: "This definition means little to an engineer."

It's really not a surprising sentence or unexpected. It was referring to a mathematical straight-up definition that basically means nothing outside of a theoretical sense; therefore, it doesn't mean anything to the ever practical minded engineer. But it made me laugh as I thought of a multitude of engineer jokes. Yes, sometimes I make up jokes about my own kind. Ask me about band jokes sometime. (I was in band for eight years).

Anyway, after I was done laughing at myself and my clever wit, I started thinking about engineers, engineers as portrayed TV and books, what engineers are, what engineers aren't, etc.

So rule number one: Engineers are not scientists.

What does that mean? We don't deal with much theoretical stuff. Oh, there are theoretical engineers, but they're the sort of engineers who spend their lives teaching and doing research at major universities. Not the sort of engineer that's going to be working on the flagship of your naval fleet.

Number two: Engineers are not magicians.

We can't pull something out of nothing. We can't defy the laws of physics. Heck, we usually leave the disproving of laws and the creation of new ones to scientists. We deal with what's real in the here and now.

Number three: Engineers are not mathematicians.

Sure we can hold our own in a math discussion. We may know what a Hilbert space is and how to derive a cross product, but we don't learn these things for the joy of learning them. We learn them because we need to know them in order to make working Kalman Filters, so that our spacecraft can detumble properly.

Number four: Engineers are not people.

Ok, I'm joking about that one. We're people.

The bottom line is that 90% of engineers are PRACTICAL. We design, build, and operate things. We solve problems as they're presented in real world scenarios....though we tend to ignore friction and atmospheric drag...We do use computer programs a lot to help us model and determine things. We are not generally theoretical, and we don't care for the mathematical definitions. Tell us the real deal, so we can solve whatever problem we're given.

Thursday, July 29, 2010

Engineering Spotlight: Alisha H., CEE

Name: Alisha H.
Major: Civil Engineering*
Title: E.I.T.**, Bachelor's of Civil Engineering
Company: Georgia Tech...Currently looking for a job...hire me! (Update: Alisha actually has a job now in Nashville, TN)

Why did you want to become an engineer, and more specifically, your particular type of engineer?
I've always been in love with logical concrete solutions. I loved looking at how things were put together and how they stayed that way. Engineering runs in my family. My Dad is a Civil, my Grandpa and Uncle built/designed their own small planes, and my brother has always worked within automotive (including diesel engines). However, I got my love of order and organization from my Mom who is a teacher. I chose Civil because it was the best fit; I was the kid always playing with my brother's Legos and building my own Barbie accessories (tree house, playground, etc.).

What do you do? (At your job or in your research?)
Currently, I am on the job hunt as a recent graduate. My primary interests are in Site Design and Transportation Design. I've also had a couple years experience with a small geotechnical firm in which I designed retaining walls.

Contrary to popular belief you cannot set a building anywhere on a site and expect it to be fine; this is where a Site Designer comes in. A Site Designer takes a site and an idea on location for a building and figures out how to mesh the two by looking at how to move the dirt, where to drain the water, where to run power/water/everything lines, and how to do it with minimal environmental impact.

Do you know road surfaces and traffic signals get designed? Guess what: that's the Transportation Engineer's job. There is so much more involved in roadways than anyone can imagine, so much data is collected and used to run tests.

Finally retaining walls: bet you've hardly ever noticed the walls that hold the road up or hold the hill back so there can be a flatter surface below. These walls are not made up of simple blocks stacked in patterns; no, there is much more behind the surface. There are many types of walls: Cast-in-Place, Modular Block, Baskets, Soil-Nail, Earth Anchor and tons of variations within those. I truly is amazing feat to hold a 40 ft. tall hill with a shopping center on top up and away from a small creek bed with a quiet neighborhood on the other side.

What do you do outside of engineering?
I ride and take care of my horse (sometimes I'm acting Barn Manager at my stable and am in charge of 50+ horses). I design and make most of my own jewelry. I also love to read, spend time outdoors, and create.

Anything else you would like us to know about you or your work?
I truly enjoy and love Civil Engineering. It is a timeless job that we will always need people doing. It can be challenging and a whole lot of fun!


* Technically I'm in the last freshman class that was listed as Civil and Environmental Engineering, before Environmental Engineering got it's own major
** E.I.T. = Engineering-in-Training. This means I passed an 8 hour long exam covering everything I ever learned in college including some stuff I didn't actually learn in college. Passing this test also means that after 5 years of work experience within my degree, I can sit for my Professional Engineering License, P.E.

Friday, July 23, 2010

Spin Stabilization

So yesterday, I posted a little description of what I do, in our first Engineering Spotlight. I know it can be hard to imagine how spinning wheels can basically reorient or stabilize a spacecraft. It was hard to imagine when I first learned about it. But what my prof did then, and what I'm doing for you now, is showed a video that made it a little easier to grasp.

So watch this video!

Cool, isn't it?

This spinning technique is why many satellites are "spin stabilized". This means the satellite is essentially always rotating. Like the CDs in the video, this rotation makes it harder for the satellite to be disturbed. An astronaut can poke it, and the effect will be minimized.

This is all part of Attitude Determination and Control!

Any questions?